There are three different versions of this radio: MOTOR-1DAB, MOTOR-1DAB-1 and MOTOR-6DAB. They differ as follows:

The model "MOTOR-1DAB" forms the basis with warm white LCD lighting, an AUX input on the back and FM and DAB reception. Connecting cables for an active or motorized antenna and an external amplifier are available. The Bluetooth function can be supplemented with the separately available Bluetooth module.

The model "MOTOR-1DAB-1" is basically the basic model, but has a built-in Bluetooth receiver and also comes with an external microphone for the hands-free system, which is also built-in. The LCD color is also warm white.

The top model "MOTOR-6" comes with Bluetooth incl. hands-free system as standard, as well as three pre-amplified audio outputs (front/rear/sub), an additional AUX and two USB ports on the rear and certified iPod/iPhone control via USB. In addition, the display color is freely adjustable and can therefore be adapted to the color of the instrument lighting.

If a radio without a panel for mounting behind the dashboard is required, one can also be assembled. For individual requests, please contact us by e-mail, telephone or via the contact form.


EQUIPMENT

- DAB+ digital radio
- FM radio with RDS functions
- 1x AUX input (3.5mm) on the back of the device
- A2DP Bluetooth audio playback for wireless smartphone integration (MOTOR-1DAB-1 and MOTOR-6 models only)
- Bluetooth hands-free kit with microphone included (MOTOR-1DAB-1 and MOTOR-6 models only)
- Stereo preamp outputs front/rear/sub (MOTOR-6 model only)
- 2x USB input on the back of the device (MOTOR-6 model only)
- Certified Apple iPhone control via USB cable (MOTOR-6 model only)

SCOPE OF DELIVERY

- RETROSOUND MOTOR-1DAB or MOTOR-6 radio module
- RETRO-RADIO-C RETROSOUND display unit (chrome)
- RSP-308 RETROSOUND front panel (chrome)
- RSP-309 RETROSOSUND inserts (chrome)
- RSP-039P RETROSOUND plastic control knob (black/chrome)
- RSP-078 RETROSOUND metal control ring (chrome)
- RSP-294 RETROSOUND ISO installation kit for DIN shaft
- USB32G Mini USB flash drive 32GB (black, MOTOR-6 only)
- XUB060 USB panel jack with 60cm cable (black, MOTOR-6 only)
- H-KENNZEICHEN confirmation from TÜV Süd


VETERAN ENTRY

Any concerns that the installation of a RetroSound car radio might jeopardize the veteran entry are unfounded. All test centers have declared the installation of a RetroSound car radio to be suitable for veterans.

FUNCTIONS

- DAB+/UKW/MW radio receiver with RDS and 30 station presets
- Tuner with European even and odd radio frequencies
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS Loudness function
- Non-volatile memory
- Bluetooth hands-free kit with A2DP audio streaming (MOTOR-1DAB-1 and MOTOR-6 models only)
- Playback of MP3 and WMA files via the rear USB input (MOTOR-6 only)
- Apple iPhone control (touchscreen operation of the Apple iPhone is still active in parallel) (MOTOR-6 only)
- Adjustable LCD lighting with 32,000 different colors (MOTOR-6 only)
- 3 stereo cinch outputs for external amplifiers (front/rear/subwoofer) (MOTOR-6 only)

TECHNICAL DATA RADIO PART

- VHF European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
- MW Frequency range 530-1710 kHz (9 kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas

GENERAL DATA

- Radio base unit dimensions 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 Ohm, - Speaker impedance 4-8 Ohm
- Input sensitivity AUX1 >300 mV / 6 kOhm
- Input sensitivity AUX2 >300 mV / 6 kOhm


LEGAL NOTICE

iPod and iPhone are trademarks of APPLE Computer, registered in the U.S. and other countries For best results, Apple has established specific compatibility requirements for accessory manufacturers. Products that are designed and certified as compatible are labeled "Made for" on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories with the "Made for" label for your device (see below).
"Made for iPod" means that an electronic accessory is specifically designed to connect to the iPod and has been certified by the developer to meet Apple performance standards.
"Made for iPhone" means that an electronic accessory is specifically designed to connect to the iPhone and has been certified by the developer to meet Apple performance standards.


E-APPROVAL

- E-approval e13 03 10006 e13*72/245*2006/96*10006*00